146
Rear gate
To close the rear gate:
Pull down the rear gate when the rear gate
is opened. The rear gate will close auto-
matically.
registered.
! Memory function
S02AJ0101
Registration of the rear gate height:
To register the rear gate height, perform
the following procedures while the ignition
switch is in the “LOCK”/“OFF” position.
1. Open the rear gate using the power
rear gate function.
2. With the rear gate at the desired
height, stop it using the power rear gate
function.
3. Press the memory switch to select the
“ON” status.
NOTE
. If the rear gate is moved slowly, it
may not operate automatically open or
close.
. When leaving the vehicle, make sure
that all doors and the rear gate are
completely locked.
! Manual operation
NOTE
S02AJ0108
Memory switch
Using the power rear gate operation is
recommended. Manual operation will
require physical effort.
The power rear gate can be closed
manually. Refer to “Manual rear gate”
FP141.
Memory switch status
1) ON status
2) OFF status
Your desired rear gate height can be
Power rear gate button on the inside edge
of the rear gate
1) Power rear gate button
2) Power rear gate lock button (if equipped)
4. With the rear gate at the desired
height, press and hold the power rear gate