Door locks
& Automatic door locking/un-
locking
133
” will appear and
warning indicator “
the warning chime will also sound.
S02AC08
NOTE
Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the power
door locking switches.
NOTE
. Perform the settings of the auto-
matic door locking and unlocking on
the combination meter. Refer to “Menu
screens” FP195.
. When getting out of the vehicle from
a rear door, make sure to unlock all the
doors by pushing the unlock side of the
power door locking switch. If a rear
door is unlocked from the inside door
lever then the door is opened and
closed, the Key lock-in prevention
function will be triggered. All doors will
be unlocked, the Key lock-in prevention
& Key lock-in prevention func-
tion
S02AC06
Under the following conditions, all the
doors will not lock when the door lock
switch is pushed with the driver door open.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”).
. The ignition switch is in the “ACC” or
“ON” position (models with “keyless ac-
cess with push-button start system”).
NOTE
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
. The factory setting (default setting)
for this function is set as “operational”.
This function’s operational/non-opera-
tional setting can be changed by a
SUBARU dealer. Contact a SUBARU
dealer for details.
. When getting out of the vehicle from
a rear door, make sure to unlock all the
doors by pushing the unlock side of the
power door locking switch. If a rear
door is unlocked from the inside door
lever then the door is opened and
– CONTINUED –
Example
1) Press to lock
2) Press to unlock
All doors and the fuel lid are automatically
locked or unlocked under the following
conditions.
. For automatic door locking
– When the vehicle speed reaches 12
mph (20 km/h) or higher.
– When the select lever is shifted into
a position other than the “P” position.
. For automatic door unlocking
– When the ignition switch is turned to
OFF.
– When the select lever is shifted into
the “P” position.
– When the driver’s door is open.