Keyless access with push-button start system
NOTE
! Enabling functions
S02AP0702
When the procedure to disable the func-
tions is performed again, a chirp will
sound, and the functions are enabled.
NOTE
. The keyless access function will be
enabled only if you perform the proce-
dure in the same manner used to
disable the function (for example, when
disabling by operating the driver’s
door, the function will not be enabled
even if you operate the access key fob).
. Press the push-button ignition
switch if you do not know the proce-
dure in which the keyless access func-
tion was disabled.
– When disabling by operating the
driver’s door: a chirp will not sound
– When disabling by operating the
access key fob: a chirp will sound
& Selecting audible signal op-
eration
S02AP12
Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.
NOTE
The setting can be changed by operat-
ing the combination meter display
(color LCD). For details, refer to “Vehi-
cle Setting” FP196.
& Warning chimes and warning
indicator
S02AP06
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to “Warning chimes and
warning indicator of the keyless access
with push-button start system” FP178.
& When access key fob does
not operate properly
& Replacing battery of access
key fob
S02AP09
Refer to “Replacing battery of access key
fob” FP485.
& Replacing access key fob
S02AP13
Access key fobs can be replaced by a
SUBARU dealer. For more details, contact
a SUBARU dealer.
& Certification for keyless ac-
cess with push-button start
system
S02AP14
. U.S.-spec. models
FCC ID: HYQ14AHK
FCC ID: Y8PSSPIMB02
FCC ID: Y8PFJ16-1
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.
S02AP08
Refer to “Access key fob – if access key
fob does not operate properly” FP429.
NOTE
This device complies with part 15 of the
– CONTINUED –
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
123