11-44
Maintenance and service/Replacing key battery
7. Tighten the upper and lower screws.
& License plate light
2. Turn the bulb socket counterclockwise
and pull out the socket.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the bulb socket and the
license plate light cover.
& Other bulbs
It may be difficult to replace the bulbs.
Have the bulbs replaced by your
SUBARU dealer if necessary.
Replacing key battery
The access key fob / transmitter battery
may be discharged under the following
conditions.
. The operation of the keyless access
function is unstable
. The operating distance of the remote
keyless entry system is unstable
. The transmitter does not operate prop-
erly when used within the standard dis-
tance
Replace the battery with a new one.
CAUTION
1. License plate light must be pushed
inwards, then pulled out to be removed.
. Do not let dust, oil or water get on
or in the access key fob/trans-
mitter when replacing battery.
. Be careful not to touch or da-
mage the printed circuit board in
the access key fob/transmitter
when replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. There is a danger of an explosion
if the battery is incorrectly re-
placed. Replace only with the