In case of emergency/Towing
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.
9-15
Front tie-down hooks:
WARNING
3. Screw the towing hook into the thread
hole until its thread can no longer be seen.
. Do not use the towing hook
except when towing your vehicle.
. Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with prop-
er operation of the fuel pump
shut off function when the vehi-
cle is struck from behind.
CAUTION
The front tie-down hooks are located
between each of the front tires and the
front bumper.
To prevent deformation to the bum-
per and the towing hook, do not
apply an excessive load to the
towing hook.
4. Tighten the towing hook securely
using the jack handle.
After towing, remove the towing hook from
– CONTINUED –