7-74
Starting and operating/Reverse Automatic Braking System
NOTE
Automatic braking only holds the ve-
hicle for 2 seconds. Before the auto-
matic brake is released, a warning
sound (3 short beeps followed by a
long beep) will activate to alert the
driver that the automatic brake will be
released.
& Canceling the Reverse Auto-
matic Braking system opera-
tion
The Reverse Automatic Braking system
can be temporarily cancelled by any of the
following operations.
. While the vehicle is stopped by the
operation of automatic braking, the brake
pedal is depressed.
. While the vehicle is stopped by the
operation of automatic braking, the accel-
erator pedal is depressed.
. The accelerator pedal is depressed
hard (In this case, limited acceleration will
be canceled and the vehicle will continue
reversing.).
. The select lever is shifted to a position
other than the “R” position.
NOTE
The system will be cancelled if the
object is no longer detected.
& Reverse Automatic Braking
system ON/OFF setting
While the select lever is shifted to the “R”
position, the below functions of the Re-
verse Automatic Braking system can be
set by operating the multi function display.
For details about how to operate the multi
function display, refer to “Basic operation”
F3-45.
Consult your SUBARU dealer for
additional information about towing
a trailer.
When the Reverse Automatic Braking
system is turned OFF, the following
indicator will illuminate.
RAB OFF indicator: illuminates when the
Reverse Automatic Braking system is turned
OFF.
1)
2)
ON/OFF setting of Reverse Automatic
Braking
ON/OFF setting of the object detection
warning sound
CAUTION
When towing a trailer, turn the
Reverse Automatic Braking OFF
switch to deactivate the system.
RAB OFF indicator will turn off when the
Reverse Automatic Braking system is
turned ON.
NOTE
. When the settings cannot be chan-
ged, the ON/OFF setting key will be
grayed out.
. The ON/OFF setting key may be