7-60
Starting and operating/BSD/RCTA
! Lane Change Assist (LCA)
1)
Operating range
The system notifies the driver of vehicles
approaching at a high speed in the
neighboring lanes. If the system detects
a vehicle approaching at a high speed in
the neighboring lanes, it warns the driver
of dangers by illuminating the BSD/RCTA
approach indicator light(s) on the outside
mirror(s). If the driver operates the turn
signal lever in the direction where the
BSD/RCTA approach indicator light is
illuminating, the system warns the driver
of dangers by flashing the BSD/RCTA
approach indicator light.
! Rear Cross Traffic Alert (RCTA)
1)
Operating range
The system notifies the driver of another
vehicle approaching from either side when
driving in reverse. This feature helps the
driver check the rear and side areas of the
vehicle when moving backward.
If the system detects a vehicle approach-
ing from either side while moving back-
ward, it warns the driver of dangers in the
following way.
. The BSD/RCTA approach indicator
light(s) on the outside mirror(s) flashes.
. A warning buzzer sounds.
1)
A)
The detection range of the radar sensors
Vehicle that may be detected
WARNING
In angled parking as indicated in the
illustration above, the system may
detect a vehicle (A) that is coming
across the front of your vehicle in
some cases. Always be sure to
check the surroundings with your
eyes when reversing the vehicle,
because the detectability of RCTA
is limited.