7-52
Starting and operating/Hill start assist system
& To activate/deactivate the Hill
start assist system
CAUTION
When starting on an up hill grade,
make sure the Hill start assist OFF
indicator light is off.
If the Hill start assist OFF indicator
light is on, make sure the parking
brake is applied.
To activate or deactivate the Hill start
assist system, perform the following steps.
NOTE
Hill start assist OFF indicator light (type A)
If you make an error when performing
any steps in the following procedure,
place the ignition switch in the
“LOCK”/“OFF” position once and then
start over again.
Type A combination meter
! To deactivate
1. Park your vehicle in a flat and safe
location and apply the parking brake.
2. Turn the ignition switch to the “LOCK”/
“OFF” position.
3. Restart the engine.
Type B combination meter
Hill start assist OFF indicator light (type B)
4. Confirm the following items.
(1) The Brake system warning light
illuminates.
(2) The Vehicle Dynamics Control