Audio / Audio set
5-35
! Troubleshooting guide
Experience Cause Action Mismatch of time alignment- a user may hear a short period of programming replayed or an echo, stutter or skip.
Sound fades, blending in and out.
Audio mute condition when an HD2 / HD3 multicast channel had been playing.
Audio mute delay when selecting an HD2 / HD3 multicast channel preset.
Text information does not match the present song audio.
No text information shown for the present selected frequency.
The“ Acquiring” caution message appears when the system attempts to acquire digital transmission.
The radio stations analog and digital volume is not properly aligned or the station is in ballgame mode.
Radio is shifting between analog and digital audio.
The radio does not have access to digital signals at the moment.
The digital multicast content is not available until HD Radio TM broadcast can be decoded and make the audio available. This takes up to 7 seconds.
Data service issue by the radio broadcaster.
Data service issue by the radio broadcaster.
When acquiring digital data while receiving a digital broadcast and SPS station.
None, radio broadcast issue. A user can contact the radio station.
Reception issue. May clear-up as the vehicle continues to be driven. Turning the indicator of the HD Radio TM off will change the radio mode to analog audio.
This is normal behavior, wait until the digital signal returns. If out of the coverage area, seek a new station.
This is normal behavior, wait for the audio to become available.
Broadcaster should be notified. Complete the form; www. ibiquity. com / automotive / report _ radio _ station _ experiences.
Broadcaster should be notified. Complete the form; www. ibiquity. com / automotive / report _ radio _ station _ experiences.
. When the reception in digital of the SPS station is confirmed.
. When the system determined that the SPS station could not be received.
. When the SPS broadcast is ended( stopped) by the radio station while receiving SPS.
– CONTINUED –