Climate control/Defrosting
Contact your SUBARU dealer for in-
spection.
. The indicator light on the air inlet
selection button may flash in the
following cases. However, this does
not indicate a malfunction.
– After the vehicle battery has been
disconnected and reconnected.
– When the vehicle battery voltage
is low.
Defrosting
& Type A and B
Select the “ ” or “ ” mode by turning the
airflow mode selection dial to defrost or to
dehumidify the windshield and front door
windows.
& Type C
Select the “ ” mode by pressing the
defroster button, or select the “ ” mode
by turning the airflow mode selection dial
to defrost or to dehumidify the windshield
and front door windows.
& Type D
Select the “ ” mode by pressing the
defroster button, or select the “ ” mode
by pressing the airflow mode selection
button to defrost or to dehumidify the
windshield and front door windows.
NOTE
. When the “ ” or “ ” mode is
selected, the air conditioner compres-
sor operates automatically regardless
of the position of the air conditioner
button to defrost the windshield more
quickly. However the indicator on the
air conditioner button will not illumi-
nate. At the same time, the air inlet
4-11
selection is automatically set to the
outside air mode.
For type A climate control system, in
this state:
– You cannot stop the air condi-
tioner compressor by pressing the
air conditioner button.
– You cannot select the recircula-
tion mode by pressing the air inlet
selection button.
. For type C and D climate control
system, after defrosting the windshield
by pressing the defroster button “ ”,
pressing the button again returns the
system to the setting that had been
selected before the defroster was acti-
vated.