Subaru Forester Manuals 2018 Forester Owner's Manual | Page 273

Instruments and controls/Horn Horn Heated Steering Wheel sys- tem (if equipped) The Heated Steering Wheel system warms the steering wheel at a constant temperature. To turn on the Heated Steering Wheel system, pull the Heated Steering Wheel switch when the ignition switch is in the β€œON” position. Then the steering wheel will be warmed and the indicator light on the switch will illuminate. 1) Horn mark To sound the horn, push the horn pad. 3-119 CAUTION . Use the Heated Steering Wheel system with the engine running. Otherwise, the battery voltage may drop below the permissible level and it may not be possible to start the engine. . There is a possibility that people with delicate skin may suffer slight burns even at low tempera- tures if they use the Heated Steering Wheel for a long period of time. When using the Heated Steering Wheel, always be sure to warn the persons concerned. . Do not cover the Heated Steering Wheel with an object such as a steering wheel cover. Doing so may cause the Heated Steering Wheel to overheat. NOTE 1) 2) 3) Heated Steering Wheel switch Indicator light Heated area To turn off the Heated Steering Wheel system, pull the switch again. Then the indicator light will turn off. . If the surface temperature of the steering wheel is approximately above 1048F (408C) when the Heated Steering Wheel system is turned on, the system will not heat the steering wheel. Then, the indicator light will continue to illuminate. . The Heated Steering Wheel system – CONTINUED –