Instruments and controls/Mirrors
! Rear wiper
To turn the rear wiper on, turn the knob
switch upward.
To turn the wiper off, return the knob
switch to the “ ” position.
” posi-
With the switch turned to the “
tion, the rear wiper will operate intermit-
tently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the “R” position
(CVT models) or the shift lever to the
reverse position (MT models), the rear
wiper will switch to continuous operation.
When you move the select lever/shift lever
from the “R” (reverse) position to another
position, the rear wiper will return to
intermittent operation.
intermittently.
! Washer
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the “ ” position. The washer
fluid sprays until you release the knob.
To wash the rear window when the rear
wiper is not in use, turn the knob switch
downward to the “ ” position. The washer
fluid sprays and the wiper operates until
you release the knob.
3-107
Mirrors
Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
& Inside mirror
CAUTION
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
NOTE
1)
2)
Normal position
Anti-glare position
Push the tab on the mirror for normal use.
To reduce glare from the headlights of the
vehicle behind you, pull the tab to the
antiglare position.
Even if the rear wiper switch is in the
“ ” position, while the shift lever/
select lever is in the “R” position with
the windshield wiper operating con-
tinuously, the rear wiper will operate
– CONTINUED –