3-40
Instruments and controls/Multi information display (models with type B combination meter)
5)
6)
Select lever/gear position indicator (refer
to “Select lever/gear position indicator
(CVT models)” F3-31.)
Odometer (refer to “Odometer” F3-10.)/
double trip meter (refer to “Double trip
meter” F3-10.)
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the “ ” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “ ” on the display,
pull the “ /SET” switch on the steering
wheel toward you.
& Welcome screen and Good-
bye screen
Control switch
1) Up (select)
2) Set (enter)
3) Down (select)
& Basic operation
Multi information display
1) Fuel gauge (refer to “Fuel gauge” F3-
12.)
2) Warning screen (refer to “Warning
screen” F3-41.)/Basic screen (refer to
“Basic screens” F3-41.)
3) Cruise control information display
4) Warning indicator
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “ /SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
When the driver’s door is opened and
closed after unlocking the door, the
welcome screen will appear on the multi
information display for approximately 20
seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the multi informa-
tion display gradually turns off (Good-bye
screen).
NOTE
. The basic screen will be shown
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.