3-38
Instruments and controls/Information display (Mexico–spec. models)
! X-mode indicator (if
equipped)
display is giving a reading other than the
journey time, the display switches to the
journey time, flashes for 5 seconds, and
returns to its original reading each time a
complete hour has elapsed.
NOTE
The journey time is reset when the
ignition switch is turned to the “LOCK”/
“OFF” position. It is also reset if the
ignition switch is turned to the “LOCK”/
“OFF” or “ACC” position prior to
restarting of the engine.
! Average vehicle speed
For type A combination meter
1) Trip knob
Pressing the trip knob toggles the display
between the average vehicle speed cor-
responding to the A trip meter display and
the average vehicle speed corresponding
to the B trip meter display.
When either of the trip meter displays is
reset, the corresponding average vehicle
speed value is also reset.
NOTE
This display shows the average vehicle
speed since the trip meter was last reset.
When either trip meter display is reset,
the average vehicle speed correspond-
ing to that trip meter display is not
shown until the vehicle has subse-
quently covered a distance of 1 mile
(or 1 km).
This indicator will be shown while the X-
mode is activated. It will turn off w