Subaru Forester Manuals 2018 Forester Owner's Manual | Page 186

3-32 Instruments and controls/Warning and indicator lights & Turn signal indicator lights These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to “Replacing bulbs” F11-39. & High beam indicator light Select lever/gear position indicator (type B) 1) Upshift indicator 2) Downshift indicator 3) Select lever/gear position indicator This indicator shows the position of the select lever. For models with manual mode, when the manual mode is selected, the gear posi- tion indicator (which shows the current gear selection) and the upshift/downshift indicator light up. Refer to “Continuously variable transmission” F7-25. For models with SI-DRIVE, the upshift/ downshift indicators are switched off while the Sport Sharp (S#) mode is selected. This light shows that the headlights are in the high beam mode. This indicator light also illuminates when the headlight flasher is operated. If this light blinks, do not use the cruise control. In addition, if it blinks frequently, contact your SUBARU dealer for an inspection. CAUTION If the CHECK ENGINE warning light/ malfunction indicator light illumi- nates, the cruise control indicator light flashes at the same time. At this time, avoid driving at high speed and have your vehicle in- spected at a SUBARU dealer as soon as possible. & High beam assist indi- cator light (if equipped) & Cruise control set in- dicator light (if equipped) This light illuminates when the high beam assist function is activated. For details about the high beam assist function, refer to “High beam assist function” F3-95. This light illuminates when vehicle speed has been set to use the cruise control function. Refer to “To set cruise control” F7-54. & Cruise control indicator light (if equipped) & Automatic headlight beam leveler warning light (if equipped) This light illuminates when the cruise control main button is pressed to activate the cruise control function. For details, refer to “To set cruise control” F7-54. This light illuminates when the automatic headlight beam leveler does not operate normally.