Keys and doors/Keyless access with push–button start system
. If an access key fob is lost, it is
recommended that the remaining ac-
cess key fob be reregistered. For
reregistration of an access key fob,
contact a SUBARU dealer.
. For a spare access key fob, contact
a SUBARU dealer.
. Up to 7 access key fobs can be
registered for one vehicle.
. Carefully store the key number plate
supplied with the access key fob. It is
necessary for vehicle repair.
. Do not leave the access key fob in
the storage spaces inside the vehicle,
such as the door pocket, dashboard
and the corner of the cargo area.
Vibrations may damage the key or turn
on the switch, possibly resulting in a
lockout.
. After the vehicle battery is dis-
charged or replaced, initialization of
the steering lock system may be re-
quired to start the engine. In this case,
perform the following procedure to
initialize the steering lock.
(1) Turn the push-button ignition
switch to the “OFF” position. For
details, refer to “Switching power
status” F3-7.
(2) Open and close the driver’s
door.
(3) Wait for approximately 10 sec-
2-13
onds.
When the steering is locked, the initi-
alization is completed.
& Locking and unlocking with
“keyless access” entry func-
tion
! Operating ranges
1)
LED indicator
When the access key fob is within either of
the operating ranges of the front doors,
the LED indicator on the access key fob
flashes. When the keyless access func-
tions are disabled, the LED indicator does
not flash unless a button on the access
key fob is pressed.
1)
2)
Antenna
Operating range
The operating ranges of the door and rear
gate locking/unlocking functions are ap-
proximately 16 to 32 in (40 to 80 cm) from
the respective door handles and the rear
gate ornament.
! Operating range tips
. Locking by using the keyless access
function can be operated only by the door
lock sensor in the operating range in
which the access key fob is detected.
. Unlocking by using the keyless access
function can be operated only by the door
handle in the operating range in which the
access key fob is detected.
. If the access key fob is placed too
– CONTINUED –