Conventional Cruise Control
( 4) When the vehicle speed is between approximately 25 MPH( 40 km / h) and 90 MPH( 145 km / h), press the RES / SET switch to the“ SET /-”. The vehicle speed at the time when the switch is pressed will become the set vehicle speed, and constant speed driving will initiate. and the set vehicle speed are displayed on the EyeSight display area.
SET indicator
S02084 S02684
WARNING
The“ Obstacle Detected” warning will not activate while Conventional Cruise Control is functioning.
CAUTION During Conventional Cruise Control use, accelerator and brake control to follow the vehicle in front is not performed. Operate the accelerator and brake pedals as necessary.
NOTE
� On a downhill grade, automatic braking may operate in order to maintain the set vehicle speed.
� When driving on a curve, the vehicle may not accelerate, or may decelerate, even if the set speed is higher than the current vehicle speed.
� To return to Adaptive Cruise Control use, cancel the Conventional Cruise Control then briefly press the( following distance setting) switch. A buzzer will sound( 1 short beep) when switching to Adaptive Cruise Control.
81