Subaru Forester Manuals 2017 Forester Owner's Manual | Page 573

11-42 Maintenance and service/Replacing bulbs & Rear combination lights NOTE The stop light is an LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement. Front turn signal light (models with LED headlight) Front side marker light (models with LED headlight) 1) Front side marker light 2. Turn the socket counterclockwise and pull it out. 3. Pull out the bulb from the socket and replace the bulb with a new one. 4. To install the socket to the headlight assembly, turn it clockwise until it clicks. 5. Install the electrical connector to the clip. & Front fog light (if equipped) Front side marker light and parking light (models with halogen headlight) 1) Front side marker light 2) Parking light It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. 1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly.