Subaru Forester Manuals 2017 Forester Owner's Manual | Page 464

Starting and operating/BSD/RCTA operation and the BSD/RCTA warning indicator will disappear. However, if the BSD/RCTA warning indicator has appeared for a prolonged time, have the system inspected at a SUBARU dealer as soon as possible. . The detectability of the radar sensors is restricted. The BSD/RCTA detection may be impaired and the system may not operate properly under the following conditions. – When the rear bumper around the radar sensors is distorted – When ice, snow or mud adheres to the rear bumper surface around the radar sensors – When stickers, etc. are affixed on the areas of the radar sensors on the rear bumper – During adverse weather conditions such as rain, snow or fog – When driving on wet roads such as snow-covered roads and through puddles . The radar sensors may not detect or may have difficulty detecting the following. – Small motorcycles, bicycles, pedestrians, stationary objects on the road or road side, etc. – Vehicles with body shapes that the radar may not reflect (vehicles with a low body height such as sports cars or a trailer with no cargo) – Vehicles that are not approaching your vehicle even though they are in the detection area (either on a neighboring lane to the rear or beside your vehicle when reversing) (The system determines the presence of approaching vehicles based on data detected by the radar sensors.) – Vehicles traveling at significantly different speeds – Vehicles driving in parallel at almost the same speed as your vehicle for a prolonged time – Oncoming vehicles – Vehicles in a lane beyond the neighboring lane – Vehicles travelling at a significantly lower speed that you are trying to overtake . On a road with extremely narrow lanes, the system may detect vehicles driving in a lane next to the neighboring lane. 7-61 & BSD/RCTA approach indicator light/warning buzzer While the BSD/RCTA is active, the following item(s) will operate to alert the driver. . The BSD/RCTA approach indicator light (when there are vehicles in the neighboring lanes) . The BSD/RCTA approach indicator light and warning buzzer (when a vehicle is approaching from the left or right side while reversing) ! BSD/RCTA approach indicator light BSD/RCTA approach indicator light It is mounted in each side of the outside mirrors and will illuminate when a vehicle approaching from behind is detected. If an indicator light is illuminated and the turn – CONTINUED –