Subaru Forester Manuals 2017 Forester Owner's Manual | Page 437

7-34 Starting and operating/Power steering & SI-DRIVE switches SI-DRIVE switches To select the Intelligent (I) mode, perform either of the following procedures. . Press the “S/I” switch when the Sport (S) mode is selected . Press the “S#/I” switch when the Sport Sharp (S#) mode is selected To select the Sport (S) mode, press the “S/ I” switch when any mode other than Sport (S) mode is selected. To select the Sport Sharp (S#) mode, press the “S#/I” switch when any mode other than Sport Sharp (S#) mode is selected. NOTE . While the engine is cool, you cannot change to Sport Sharp (S#) mode. . The next time you turn on the engine, after you turned off the engine in the Sport (S) mode or Sport Sharp (S#) mode, the SI-DRIVE mode changes to the Intelligent (I) mode. . While the engine is running, if the CHECK ENGINE warning light/malfunction indicator light illuminates, the SIDRIVE mode changes to the Sport (S) mode. In this case, it is not possible to change to another mode. . If there is a possibility that the engine could overheat because of a temperature increase of the engine coolant, it is not possible to change to the Sport Sharp (S#) mode. While the vehicle is in the Sport Sharp (S#) mode, it changes to the Sport (S) mode when the engine coolant temperature increases. . If any of the SI-DRIVE indicators blink, the SI-DRIVE system may be malfunctioning. Contact your SUBARU dealer. Power steering Power steering warning light (type A) Power steering warning light (type B) The vehicle is equipped with an electric power steering system. When the ignition