1-10
Seat, seatbelt and SRS airbags/Seat heater
or “HIGH” position on the switch, as
desired, depending on the temperature.
Selecting the “HIGH” position will cause
the seat to heat up quicker.
& Rear seat heater (if equipped)
The seat heater operates when the ignition switch is in the “ON” position.
To turn off the seat heater, lightly press the
opposite side of the current position.
mode indicator on the rear seat heater
switch illuminates. When HIGH mode is
selected, both the LOW and HIGH mode
indicators illuminate. When the OFF mode
is selected, all the indicators turn off.
Selecting “HIGH” mode will cause the seat
to heat up quicker.
The indicator located on the switch illuminates when the seat heater is in operation.
NOTE
Only the front seat heater switches
retain the previous switch position
even if the engine has restarted. The
rear seat switch will reset.
Rear seat heater switch
1) HIGH mode indicator
2) LOW mode indicator
A) Left-hand side
B) Right-hand side
Press the rear seat heater switch to turn
on the rear seat heater. Then select the
“HIGH” or “LOW” mode, as desired,
depending on the temperature. Each time
you press the switch, the mode will
change as follows.
When LOW mode is selected, the LOW