Seat, seatbelt and SRS airbags/Front seats
& Power seat (driver’s seat — if
equipped)
2)
3)
4)
5)
justment of the seat, you cannot adjust
the seat cushion angle or seat height.
Seat cushion angle control switch
To adjust the seat cushion angle, pull up
or push down the front end of the control
switch.
Seat height control switch
To adjust the seat height, pull up or push
down the rear end of the control switch.
Seatback angle (reclining) control
switch
To adjust the angle of the seatback,
move the control switch.
Lumbar support control switch
To increase lower back support, push the
front side of the switch. To decrease
lower back support, push the rear side of
the switch.
! Memory function (driver’s seat — if
equipped)
WARNING
1)
Seat position forward/backward control switch
To adjust the seat forward or backward,
move the control switch forward or
backward. During forward/backward ad-
. Never adjust the seat while driving to avoid loss of vehicle control and personal injury.
. Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechanism.
. Never retrieve the seat position
while driving to avoid loss of
1-5
vehicle control and personal injury.
. Perform the seat position retrieval before driving. Be sure to
confirm that the select lever is
in the “P” position, and the
parking brake is applied, when
adjusting the seat position. Do
not drive until the retrieval of the
seat position is complete.
. When retrieving a registered seat
position, make sure the hands,
feet and possessions of rear seat
passengers are clear of the seat
adjusting mechanism.
. When any unusual conditions or
malfunctions occur during the
retrieval of the seat position, stop
the retrieval of the seat position
by performing any of the following procedures.
– Operate any of the power seat
switches
– Press the “SET” button
– Press button “1” or “2”
Some of your desired seat positions can
be registered. Register the seat position
with button “1” or “2” or each of the access
keys and retrieve the seat position.
– CONTINUED –