Instruments and controls/Mirrors
& Auto-dimming mirror/compass with HomeLink® (if
equipped)
3-109
! To Operate the Auto-Dimming Feature
Press the “ ” switch to turn the autodimming feature on/off. The auto-dimming
feature is enabled when the switch’s
green LED indicator is on. The autodimming feature will default to on with
each ignition cycle.
! To Operate the Compass Feature
1)
2)
3)
Display
HomeLink Buttons
Switch
Congratulations! Your new automobile is
equipped with an automatic dimming
mirror manufactured by Gentex Corporation. During nighttime driving, the autodimming feature senses distracting glare
from vehicle headlights behind you and
automatically dims to eliminate the glare
and preserve your vision.
1. To turn the compass feature on/off,
press and hold the “ ” switch for more
than 3 seconds or until the display turns
on/off. The compass feature will default to
on with each ignition cycle.
2. If the display reads “C”, slowly drive
the vehicle in circles until compass is
calibrated.
Compass calibration zones
3. To adjust for compass zone variance:
(1) Find your current location and
zone number on the map.
(2) Press and hold the “ ” switch for
more than 6 seconds or until a zone
number appears in the display.
(3) Once the zone number appears in
the display, toggle the “ ” switch
again until your current location zone
number appears. After you stop pressing the switch, your new zone number
will be saved. Within a few seconds,
the display will show a compass
direction.
4. If the vehicle’s magnetics have changed or if the compass appears inaccurate,
recalibrate the compass. Press and hold
the “ ” switch for more than 9 seconds or
– CONTINUED –