Instruments and controls/Warning and indicator lights
Inside warning
chime
Ding,
ding ...
(intermittent)
Access key
Operation indicaOutside warning warning
light on tor on push-button
chime
meter
ignition switch
—
Ding
Short beep
(2 seconds)
—
Short beep
(2 seconds)
—
Beep, beep ...
(5 beeps)
Ding
Long beep (60
seconds max.)
—
—
—
—
—
3-27
Status
Action
The driver’s door was opened while
the push-button ignition switch is
“ACC” and the select lever is in the
“P” position.
Switch the push-button ignition
switch to “OFF”, or close the
driver’s door.
*When exiting the vehicle, be sure
to switch the push-button ignition
switch to “OFF”.
The push-button ignition switch
was switched to “OFF” while the
driver’s door is open.
Close the driver’s door.
—
Lockout warning:
An attempt was made to lock all
doors while the access key is left
inside the vehicle.
Take out the access key from the
vehicle, and lock the doors.
*The doors cannot be locked while
the access key is inside the vehicle.
*A chirp sound will be heard, and all
doors will be unlocked.
—
Access key lock-in warning:
The door lock sensor was touched
while the push-button ignition
switch is “OFF” and the access key
is inside the vehicle.
Take out the access key from the
vehicle, and lock the doors.
*If the access key is inside the
vehicle, the doors cannot be
locked.
—
Door ajar warning:
The door lock sensor is touched
while the push-button ignition
switch is in the “OFF” position and
one of the doors including the rear
gate is opened.
Close the doors securely and lock
them.
*If one of the doors including the
rear gate is opened, the doors
cannot be locked.
—
Power warning:
The door lock sensor was touched
while carrying the access key and
the push-button ignition switch is in
a position other than “OFF” and the
select lever is in the “P” position.
Return the access key inside the
vehicle, or switch the push-button
ignition switch to “OFF”.
*If the push-button ignition switch is
not switched to “OFF”, the doors
cannot be locked.
—
– CONTINUED –