Keys and doors/Windows
opened. The AUTO function will not
operate. The window can be raised by
pulling up on the switch several times
until the window is fully closed.
To reset to normal operation, initialize
the power window to reactivate the
one-touch auto up/down function. Refer to “Initialization of power window”
F2-38.
For some models, this switch is also
equipped with a one-touch auto up feature
that allows the window to be closed fully
without holding the switch.
Press the switch up until it clicks and
release it, and the window will fully close.
To stop the window halfway, push the
switch down lightly.
NOTE
If the vehicle’s battery is disconnected
due to situations such as battery or
fuse replacement, the one-touch auto
up/down function will be deactivated.
Initialize the power window to reactivate the one-touch auto up/down function. Refer to “Initialization of power
window” F2-38.
! Anti-entrapment function
CAUTION
. Never attempt to test this function using fingers, hands or other
parts of your body.
. The anti-entrapment function
may not operate properly if some
object gets trapped just before
the window fully closes.
2-35
detects a substantial enough object
trapped between the window and the
window frame, it automatically moves
down slightly and stops.
! Operating the rear passengers’
windows
NOTE
. If a window detects an impact similar to that caused by trapping an object
(for example, when the vehicle encounters a deep pothole), the anti-entrapment function may operate.
. The window cannot be operated for
a few seconds after the anti-entrapment function operates.
. If the vehicle’s battery is disconnected due to situations such as
battery or fuse replacement, the antientrapment function will be deactivated. Initialize the power window to
reactivate the anti-entrapment function.
Refer to “Initialization of power window” F2-38.
While closing the driver’s or front passenger’s window automatically, if the window
To open:
Push the appropriate switch down and
hold it until the window reaches the
desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
– CONTINUED –