2-8
Keys and doors/Power door locking switches
Item
Switch
position
Automatically turning
off
Map lights
DOOR*1
Approximately 20
minutes later
Dome light
DOOR
Approximately 20
minutes later
Ignition
switch light
—
Approximately 20
minutes later
Door step
lights
—
None*2
Cargo
area light
DOOR
Approximately 20
minutes later
NOTE
. The factory setting (default setting)
for this function is set as “operational”.
. When leaving the vehicle, please
make sure that all doors and the rear
gate are completely closed.
. The battery drainage prevention
function does not operate while the
key is in the ignition switch.
Power door locking switches
*1: The map lights can be controlled by the
battery drainage prevention function only when
the map light switches are in the OFF position
and the door interlock switch is in the DOOR
position. For the switch positions, refer to “Map
lights” F6-3.
*2: The door step lights are not affected by the
battery drainage prevention function, so the
lights will not turn off automatically. To turn off
the lights, it is necessary that each door is
completely closed.
All doors and the rear gate can be locked
and unlocked by the power door locking
switches located at the driver’s side and
the front passenger’s side doors.
The operational/non-operational setting of
this function can be changed by a
SUBARU dealer. Contact your SUBARU
dealer to change the setting.
When you close the doors after you set
the door locks, the doors remain locked.
1)
2)
Lock
Unlock
To lock the doors, push the front side of
the switch.
To unlock the doors, push the rear side of
the switch.