PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
NOTE
NOTE
O The sound quality of the voice heard from the other party’s
speaker may be negatively impacted.
O To reset the transmit volume, select Default (Default).
O The volume cannot be adjusted while muted.
INCOMING CALL WAITING
When a call is interrupted by a third party while talking, this
screen is displayed.
1.
TRANSMIT VOLUME SETTING
1.
2.
Select OK (OK).
Select
or press the
switch on the steering
wheel to start talking with the other party.
Select Mic Volume (Mic Volume).
Select the desired level for the transmit volume.
To refuse to receive the call: Select
switch on the steering wheel.
or press the
Ɣ Select
or press the
switch on the steering
wheel to end the current call and return to the
conversation with the party on hold.
129
4
PHONE
O A continuous tone signal is a character string that consists of
numbers and the characters “p” or “w”. (e.g. 056133w0123p#1½)
O When the “p” pause tone is used, the tone data up until the
next pause tone will be automatically sent after 2 seconds have
elapsed. When the “w” pause tone is used, the tone data up
until the next pause tone will be automatically sent after a user
operation is performed.
O Release tones can be used when automated operation of a
phone based service such as an answering machine or bank
phone service is desired. A phone number with continuous tone
signals can be registered in the contact list.
O Tone data after a “w” pause tone can be operated on voice
command during a call.
3.