Adaptive Cruise Control
(2) Setting Adaptive Cruise Control
Press the RES/SET switch to the “SET/-”.
Adaptive Cruise Control is now set, and cruise
control will start.
If no vehicle in front has been detected, the
vehicle drives at the constant set target
speed.
When Adaptive Cruise Control is set, the set
speed and
are displayed on the EyeSight
display area.
S02084
S02089
NOTE
x The target vehicle speed can be set between 25 MPH (40 km/h) and 90
MPH (145 km/h).
x If the vehicle speed is approximately 25 MPH (40 km/h) or less when the
vehicle speed is set, the set vehicle speed is set to 25 MPH (40 km/h).
x When driving on a curve, the vehicle may not accelerate, or may decelerate, even if the set speed is higher than the current vehicle speed.
x If the
(Adaptive Cruise Control indicator) does not illuminate, even
when the
(CRUISE) switch is pressed, Adaptive Cruise Control will
not operate.
x If the
(Adap tive Cruise Control indicator) does not illuminate, even
when the
(CRUISE) switch is pressed, there may be a malfunction in
the system. Contact a SUBARU dealer and have the system inspected.
41