5-84
Audio/Bluetooth® settings
1. Display the “BT Devices Connection”
screen. Refer to “Registering a Bluetooth
phone for the first time” F5-80.
2. Select the desired device.
Press and hold the Trash box icon for the
device to be deleted, and then select
“OK”.
If more than 1 Bluetooth device has been
registered, select which device to connect
to.
1. Display the “BT Devices Connection”
screen. Refer to “Registering a Bluetooth
phone for the first time” F5-80.
2. Select the device to be connected.
. Supported profile icons will be displayed.
: Phone
–
–
: Audio device
–
: Smartphone Application
. Supported profile icons for currently
connected devices will illuminate.
. The Audio icon illuminates only
when in the Bluetooth audio mode.
. All icons are dimmed when Bluetooth is set to OFF or when the
connection cannot be made with the
device.
NOTE
NOTE
tration may be displayed on the Bluetooth device’s screen. Respond and
operate the Bluetooth device according to the confirmation message.
4. Check that the screen is displayed
when registration is complete.
. The system waits for connection
requests coming from the registered
device.
. At this stage, the Bluetooth functions are not yet available.
! Deleting a Bluetooth device
When deleting a Bluetooth phone, the
contact data will be deleted at the same
time.
! Connecting a Bluetooth device
Up to 5 Bluetooth devices (Phones (HFP)
and audio devices (AVP)) can be registered.
. It may take time if the device connection is carried out during Bluetooth
audio playback.
. Depending on the type of Bluetooth
device being connected, it may be
necessary to perform additional steps
on the device.
. It is not possible to establish a
Bluetooth connection with iOS devices
currently connected with a USB cable.
! Bluetooth ON/OFF
1. Display the “BT Devices Connection”
screen. Refer to “Registering a Bluetooth
phone for the first time” F5-80.
2. Select the “Bluetooth ON/OFF” key.
. Select “ON” or “OFF” to connect/
disconnect the Bluetooth communication. “ON” establishes a connection,
and “OFF” disconnects the connection.
. The setting is fixed as “OFF” when
no device is registered.
! “In-Car-Device setting” screen
The Bluetooth settings can be confirmed
and changed.
1. Display the “SETTINGS” screen. Refer
to “Registering a Bluetooth phone for the
first time” F5-80.
2. On the SETTINGS for In-Car-Device
setting select “set” key.