3-94
Instruments and controls/Wiper and washer
NOTE
& Rear window wiper and
washer switch
tion, the rear wiper will operate intermittently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the “R” position
(CVT models) or the shift lever to the
reverse position (MT models), the rear
wiper will switch to continuous operation.
When you move the select lever/shift lever
from the “R” (reverse) position to another
position, the rear wiper will return to
intermittent operation.
CAUTION
The windshield washer fluid warning
light illuminates when the washer fluid
level in the tank has dropped to the
lower limit. If the warning light illuminates, refill the tank with fluid. For the
refilling procedure, refer to “Windshield washer fluid” F11-32.
: Washer (accompanied by wiper operation)
: Continuous
NOTE
: Intermittent
: Off
Washer (accompanied by wiper op: eration)
! Rear wiper
To turn the rear wiper on, turn the knob
switch upward.
To turn the wiper off, return the knob
switch to the “ ” position.
With the switch turned to the “
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
” posi-
Even if the rear wiper switch is in the
“ ” position, while the shift lever/
select lever is in the “R” position with
the windshield wiper operating continuously, the rear wiper will operate
intermittently.
! Washer
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the “ ” position. The washer
fluid sprays until you release the knob.