3-88
Instruments and controls/Turn signal lever
Turn signal lever
& One-touch lane changer
To flash the turn signal and turn signal
indicator light three times, push the turn
signal lever up or down slightly and
immediately release it.
Illumination brightness control
The operational/non-operational setting of
the one-touch lane changer can be
changed by a SUBARU dealer. We
recommend that you contact the nearest
SUBARU dealer for details.
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.
The illumination brightness of the instrument panel dims under the following
conditions.
” or
. when the light switch is in the “
“ ” position
. when the light control switch is in the
“AUTO” position and the headlights illuminate automatically (models with auto on/
off headlights: Refer to “Headlights” F385.)
You can also adjust the illumination brightness for better visibility in the following
ways.
To brighten, turn the control dial upward.