Troubleshooting
EyeSight does not restart after a temporary stop.
Is Vehicle Dynamics Control turned off?
EyeSight cannot be activated when Vehicle Dynamics Control is off.
Is the X-mode turned on?
EyeSight cannot be activated when the X-mode is turned on.
Are you driving in the rain with old wipers or is there an oily film on the windshield?
Replace the wipers with new ones, or clean the oily film off the windshield.
Is your vehicle subject to sunlight from the front (sunset or sunrise, etc.) or to
bright headlights from oncoming vehicles at nighttime?
In these cases, EyeSight may temporarily stop operating.
The timing of the “brake more” warning is sometimes earlier and sometimes later
than what seems to be normal operation.
The “brake more” warning sounds when the system determines that more braking
is necessary, based on conditions such as the distance from the vehicle in front
and the difference in speed. As a result, timing may vary depending on how the
brake of the vehicle in front is applied.
Acceleration is sometimes slower and sometimes faster when the vehicle in front
is no longer detected.
Depending on the timing of when the detection of the vehicle in front is lost,
EyeSight’s ability to react may be slower, causing the start of acceleration to feel
delayed and braking time to feel longer than what seems to be normal operation.
Which SI-DRIVE mode is selected?
The acceleration varies due to the characteristics change of Adaptive Cruise Control depending on which mode is selected.
Cruise control is canceled automatically.
Did you perform one of the following operations?
Manually depressing the brake pedal
Pressing the CANCEL switch for cruise control
Operating the paddle shift lever
Shifting the selector lever to the M position
Pressing the Vehicle Dynamics Control OFF switch (VDC OFF indicator
illuminates.)
Pressing the X-mode switch (X mode indicator illuminates.)
Has the EyeSight system temporarily stopped?
86