Lead Vehicle Start Alert
This function notifies the driver by means of a
buzzer and the lead vehicle indicator on the
multi information display when the driver’s
vehicle remains stopped after the vehicle in
Lead
front has started to move forward. When the
vehicle
Lead
10 ft (3 m)
vehicle in front remains stopped continuously
vehicle
or more
(within a following distance of approximately
Two-tone beep
32 ft (10 m) and the driver’s vehicle remains
stopped for several seconds or longer), the
system continues to detect the vehicle in front
S00632
and this alarm activates if the vehicle in front
advances approximately 10 ft (3 m) or more while the driver’s vehicle remains stationary.
This function only activates when the select lever is in the D , M or N position.
When the Lead Vehicle Start Alert activates, a buzzer sounds a two-tone beep and the lead
vehicle indicator on the meter display flashes. Also, a pop-up screen will be displayed on
the multi function display.
F
MPG
Vehicle Ahead Has Moved
miles
S01005
NOTE
The Lead Vehicle Start Alert function setting can be turned on or off.
* Refer to page 79.
Under the following conditions, the Lead Vehicle Start Alert may activate
even when the vehicle in front has not started to move, or may not activate
even after the vehicle in front has started to move:
- A motorcycle or similar object has cut in between your vehicle and the
stopped vehicle in front.
- Weather or road conditions prevent detection of the vehicle in front.
- The EyeSight stereo cameras lose detection of the vehicle in front.
- This function will not activate when the select lever is in the D , M or N
position and the driver has not manually depressed the brake pedal.
64
S00906