Pre-Collision Braking System
Turning off the Pre-Collision Braking System
When pressing and holding the Pre-Collision
Braking System OFF switch for approximately
2 seconds (or longer), a single short beep will
sound and the Pre-Collision Braking System
(including Pre-Collision Brake Assist) will turn
off. When this control is turned off, the PreCollision Braking System OFF indicator light
on the instrument panel illuminates. To turn
the control back on, press and hold the PreCollision Braking System OFF switch for
approximately 2 seconds or longer again.
When this control is turned on, the PreCollision Braking System OFF indicator light
will turn off.
S00813
NOTE
When the Pre-Collision Braking System is turned off,
Throttle Management Control function is also turned off.
Even when the Pre-Collision Braking System is turned
switch is turned off and the engine is then restarted,
Braking System will be turned on. The system default
vehicle is restarted in “ON”.
the Pre-Collision
off, if the ignition
the Pre-Collision
setting when the
■ Pre-Collision Braking System OFF indicator light
This indicator light illuminates when the
ignition switch is turned to the ON position,
and remains illuminated for approximately 7
seconds after the engine starts. It turns on
when the Pre-Collision Braking System is
turned off.
It also illuminates under the following
conditions.
When the VDC OFF switch is pressed and
VDC is canceled
When the EyeSight system has a
malfunction
* Refer to page 76.
When the EyeSight system has stopped
temporarily
* Refer to page 77.
S00840
51