Adaptive Cruise Control
NOTE
If EyeSight operation has temporarily stopped, the Pre-Collision Braking
System OFF indicator light and Lane Departure Warning OFF indicator
light illuminate, and a symbol from “E1” to “E3” is displayed on the meter
display when the main cruise control is on.
* Refer to page 77.
Also, a pop-up screen is displayed on the multi function display.
* Refer to page 81.
If EyeSight is malfunctioning, the EyeSight warning light and the PreCollision Braking System OFF indicator light and Lane Departure Warning
OFF indicator light will illuminate. A pop-up screen will be displayed on the
multi function display. If this occurs, stop the vehicle in a safe location and
then turn off the engine and restart it. If the indicators remain illuminated
after restarting the engine, Adaptive Cruise Control cannot be used. This
will not interfere with ordinary driving; however the system should be
inspected by a SUBARU dealer as soon as possible.
* Refer to page 76.
When the operation of Adaptive Cruise Control has been automatically
canceled, perform the set cruise control operation again after the condition
that caused the cancellation has been corrected. If the cruise control function cannot be set even after the condition has been corrected, EyeSight
may be malfunctioning. This will not interfere with ordinary driving; however the system should be inspected by a SUBARU dealer as soon as
possible.
40