Q Cruise control (if equipped)
FORESTER
For models with the EyeSightTM system: Refer to the Owner’s Manual supplement for the EyeSight system.
3
2 4
1 To activate: Press the cruise control main button.
5
1
6
Cruise control enables you to maintain a constant vehicle speed without
holding your foot on the accelerator pedal and it is operative when the
vehicle speed is 40 km/h (25 mph) or more.
2 To set speed: Press the RES/SET switch to the SET side at desired speed
and release it.
3 To increase the speed:
- Press the RES/SET switch to the RES side and hold it, and then release at
desired speed.
- Depress accelerator pedal, and press the RES/SET switch to the SET side
at desired speed.
- For incremental acceleration, press the RES/SET switch to the RES side
quickly. *Each tap = plus 1 km/h (0.6 mph)
Cruise control indicator
4 To decrease the speed:
The cruise control main
- Press the RES/SET switch to the SET side and hold it, and then release at
button is pressed to activate
desired speed.
the cruise control function.
- Depress brake pedal, and press the RES/SET switch to the SET side
at desired speed.
- For incremental deceleration, press the RES/SET switch to the SET
side quickly. *Each tap = minus 1 km/h (0.6 mph)
Cruise control set indicator
The vehicle speed has
been set to use the
cruise control function.
5 To temporarily cancel:
- Press the CANCEL button.
- Depress brake pedal or the clutch pedal (MT).
- Press the X-mode switch to activate the X-mode (models with
X-mode).
To return to preset speed after it has been canceled, press the
RES/SET switch to the RES side.
6 To deactivate: Push the cruise control main button. Cruise control is
always deactivated when ignition switch is turned to ACC or LOCK/OFF.
7