6-14
Interior equipment/Cargo area cover
& To remove the cover housing
WARNING
1. Rewind the cover.
Do not place anything on the extended cover. Putting excessive
weight on the extended cover can
break it and an object on the cover
could tumble forward in the event of
a sudden stop or collision. This
could cause serious injury.
CAUTION
Be careful not to scratch the rear
gate stays while extending and
rewinding the cover. Scratches on
the stays could cause leakage of
gas from the stays, which may
result in their inability to hold the
rear gate open.
& To install the front cover
CAUTION
For models with a rear seat reclining
mechanism, when reclining the rear
seatback, move the front cover
backward so that the cover is not
damaged.
1. Align the right side of the front cover
with the triangle mark before fixing the
cover in place.
2. Push the front cover to the right side
and shorten the bar.
3. Align the left side of the front cover
with the triangle mark before fixing the
cover in place.
& To remove the front cover
1. Push the front cover to the right side
and shorten the bar.
2. Remove the front cover.
2. Push the cover housing to the right
side and shorten it.
3. Take it off the retainer.