5-18
Audio/FM/AM radio operation
NOTE
. When the HD Radio function is
turned on, Auto-store cannot be used
while receiving a broadcasting station
with SPS (Supplemental Program Service).
. When you use Auto-store, the new
stations replace any stations previously stored.
. Interrupting Auto-store: If you accidentally press the auto-store button,
you can cancel the Auto-store function
before it has been completed as follows.
– switching to the other source
mode
– pressing the auto-store button
– switching to the other band
– turning the “TUNE” dial
– pressing the “SCAN” button
(type A, C and D audio)
“LIST” button
“TUNE” dial (type A,
B, C and D audio)
“TUNE” dial (type E
audio)
! Displaying and selecting preset
stations
NOTE
For models with the multi function
display, the list of the preset broadcasting stations will be displayed when
the “LIST” button is briefly pressed
while receiving AM/FM. For details,
refer to “Audio screen” F3-46.
Seek switch
1. Briefly press the “LIST” button during
AM/FM reception to display the radio
screen.
2. Display the preferred preset station by
performing either of the following proce-
dures.
– Turn the “TUNE” dial
– Briefly press the seek switch to the
“ ” or “ ” side
3. Press the “TUNE” dial to select the
displayed station.