Subaru Forester Manuals 2015 Forester EyeSight® Manual | Seite 12

About EyeSight Continued from previous page Do not affix any stickers or install any accessories on the prohibited areas shown in the illustrations below (grey zones). Doing so may affect the stereo camera’ field of view and could prevent the EyeSight system from functioning properly. If you must affix any stickers, such as automobile inspection certificate stickers, or install accessories, do not cover the front of the cameras. If abnormal EyeSight operation occurs, remove the stickers or accessories. If the top of the instrument panel is polished with chemicals or other substances, the stereo cameras may not be able to detect objects accurately and the EyeSight system may not operate properly due to reflections in the front windshield. • Side view Monitor or other accessories • Front view S00884 Do not place any objects on top of the instrument panel and do not coat the surface above the instrument panel with chemical liquid. The stereo cameras may not be able to detect objects accurately and the EyeSight system may not function properly due to reflections in the front windshield. For details, contact a SUBARU dealer. Do not install any wiper blades other than genuine SUBARU wiper blades. Doing so may affect the stereo cameras’ field of vision and could prevent the EyeSight system from functioning properly. Replace damaged wiper blades as soon as possible. The stereo cameras may not be able to detect objects accurately and the EyeSight system may not function properly due to liquid remaining on the windshield. Keep the windshield (outside and inside) clean at all times. Do not place any stickers or accessories on the windshield (outside or inside). If you have to do so (for example, legally required), avoid the area in front of the camera. Doing so may adversely affect the field of vision of the stereo camera and can cause improper operation of the system. Do not use any glass coating agents or similar substances on the windshield. Doing so may prevent the system from operating correctly. 8