12-8
Specifications/Specifications
Specifications/Specifications
& Fluids
& Electrical system
Fluid type*1
Fluid
Fluid capacity*2
Continuously variable transmission Consult your SUBARU dealer.
fluid (CVT models)
Remarks*3
Battery type and capacity (5HR)
55D23L (12V-48AH)
Alternator
Non-turbo models: 12.9 US qt
(12.2 liters, 10.7 Imp qt)
Turbo models: 13.1 US qt (12.4
liters, 10.9 Imp qt)
“Continuously variable transmission fluid” F11-16
Brake fluid
FMVSS No. 116, fresh DOT 3 or DOT 4
brake fluid
–
“Brake fluid” F11-17
Clutch fluid (MT models)
FMVSS No. 116, fresh DOT 3 or DOT 4
brake fluid
–
“Clutch fluid (MT models)” F1118
*1: Use one of the indicated types of fluid.
*2: The indicated fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors.
*3: For more details about maintenance and service, refer to the indicated section.
12V-130A
Non-turbo models
Spark plugs
& Engine coolant
Vehicle model
Non-turbo models
Coolant capacity
MT models
CVT models
8.0 US qt (7.6 liters, 6.7 Imp qt)
CVT models
Coolant type
7.8 US qt (7.4 liters, 6.5 Imp qt)
9.4 US qt (8.9 liters, 7.8 Imp qt)
SUBARU Super Coolant
The indicated coolant quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors. For more details about maintenance and service, refer to “Cooling system” F11-11.
SILZKAR7B11 (NGK)
ILKAR8H6 (NGK)
Turbo models
& Tires
Tire size
P225/60R17 98H
Wheel size
Pressure
P225/55R18 97H
17 6 7J
Front
Rear
Wheel nut tightening torque
Turbo models
12-9
18 6 7J
2
33 psi (230 kPa, 2.3 kgf/cm2)
30 psi (210 kPa, 2.1 kgf/cm )
2
32 psi (220 kPa, 2.2 kgf/cm2)
29 psi (200 kPa, 2.0 kgf/cm )
1
89 lbf·ft (120 N·m, 12 kgf·m)*
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel
nuts by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible. For the wheel nut tightening
procedure, refer to “Changing a flat tire” F9-5.
& Temporary spare tires
Temporary spare tire size
Temporary spare tire inflation pressure
(recommended cold tire inflation pressure)
T145/80D17
185/65R17
2
60 psi (420 kPa, 4.2 kgf/cm )
33 psi (230 kPa, 2.3 kgf/cm2)