12-4
Specifications/Specifications
& Engine oil
Specifications/Specifications
For the checking, adding and replacing procedure or other details, refer to “Engine oil” F11-8.
! Alternative engine oil
If the SUBARU approved oil is unavailable, the following alternative oil can be used.
NOTE
12-5
NOTE
The procedure for changing the engine oil and oil filter should be performed by a properly-trained expert. It is recommended
that you have this service performed by your SUBARU dealer.
! Approved engine oil
We recommend that you always use the SUBARU approved engine oil. For further details, please contact your SUBARU dealer.
If the approved engine oil is unavailable, use the alternative engine oil described on the next page.
Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the
temperature and other factors.
! Non-turbo models
Oil grade
Engine oil capacity
– Adding the oil from low level to
0W-20 synthetic oil is the required oil
full level:
for optimum engine performance and
1.1 US qt (1.0 liter, 0.9 Imp qt)
protection. Conventional oil may be
– Changing the oil and oil filter:
used if synthetic oil is unavailable.
5.1 US qt (4.8 liters, 4.2 Imp qt)
*: If 0W-20 synthetic oil is not available,
5W-30 or 5W-40 conventional oil may
be used if replenishment is needed but
should be changed to 0W-20 synthetic
oil at the next oil change.
or
API classification SM or SN with
the words
“ENERGY CONSERVING” or
“RESOURCE CONSERVING”
SAE viscosity No. and
applicable temperature
ILSAC GF-4 or GF-5, which can
be identified with the ILSAC
certification mark (Starburst
mark)
– CONTINUED –