Subaru Forester Manuals 2014 Forester Owner's Manual | Page 944

11-38 Maintenance and service/Replacing bulbs Replacing bulbs WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. CAUTION Replace any bulb only with a new bulb of the specified wattage. Using a bulb of different wattage could result in a fire. For the specified wattage of each bulb, refer to “Bulb chart” F12-14. & Headlights (models with HID headlights) WARNING High-intensity-discharge (HID) bulbs are used for the low beams of the headlights. These HID bulbs use an extremely high voltage. To avoid the risk of an electric shock that could result in serious injury, observe the Maintenance and service/Replacing bulbs following precautions. . Do not replace any headlight bulbs (both low beam and high beam) by yourself. . Do not remove/restore the headlight assemblies by yourself. . Do not remove any headlightassembly components by yourself. For replacement, contact your SUBARU dealer. NOTE & Front turn signal light, front side marker light and parking light NOTE . If headlight aiming is required, consult your SUBARU dealer for proper adjustment of the headlight aim. . It may be difficult to replace the bulbs. Have the bulbs