In case of emergency/Towing
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.
9-13
threaded hole for attaching the towing
hook.
WARNING
. Do not use the towing hook
except when towing your vehicle.
. Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with proper operation of the SRS airbag
system in a frontal collision.
3. Screw the towing hook into the thread
hole until its thread can no longer be seen.
4. Tighten the towing hook securely
using the jack handle.
After towing, remove the towing hook from
Rear towing hook:
1. Take the towing hook, screwdriver and
jack handle out of the cargo area.
3. Screw the towing hook into the thread
hole until its thread can no longer be seen.
2. Pry off the cover on the rear bumper
using a screwdriver, and you will find a
4. Tighten the towing hook securely
using the jack handle.
– CONTINUED –