Audio/Bluetooth® audio
NOTE
. The Bluetooth® audio function may
not operate properly under the following conditions.
– The device is turned off.
– The battery of the device has run
down.
– The device is not connected to
the system.
– The device is behind the seat or
in the glove box.
– A metal material is covering or
touching the device.
. Depending on the type of device that
is used, operation and sound volume
may be different from normal use of
those devices.
. The sound quality may degrade due
to the influence of the device that is
connected to the system or the circumstances of the Bluetooth network.
. When another Bluetooth® device is
simultaneously connected, noise may
be heard.
& Media format
®
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
& Setting Bluetooth® audio
NOTE
For models with the multi function
display, Bluetooth® audio can be set
via the multi function display. For
details, refer to “Bluetooth® audio
setting” F3-83.
“MENU” button
“TRACK” dial (type
A, B, C and D audio)
“TRACK” dial (type
E audio)
1. Select the “BT-A SETUP” menu by
pressing the “MENU” button. For details,
refer to “Other settings” F5-10.
2. Perform the following procedure by
operating the “TRACK” dial while “BT-A” is
displayed.
5-37
NOTE
You cannot set Bluetooth® audio while
driving.
! Registering (pairing) device
NOTE
Only one device can be registered. If
you want to register another device,
delete the previously registered device
and then perform the registering procedure. For details about deleting a
device, refer to “Deleting device” F538.
1. Select the “PAIR AUDIO” menu.
– If a device is already registered,
“MEMORY FULL” will be displayed
and the mode will change to the
Bluetooth® audio setting mode.
2. After the passkey is shown on the
display, input the passkey into the device.
– If you input the correct passkey,
“PAIRED” will be displayed and the
registration procedure will be finished.
– If you input an incorrect passkey,
“FAILED” will be displayed, the registration procedure was not successful
and the mode will change to the
Bluetooth® audio setting mode.
– CONTINUED –