3-34
Instruments and controls/Information display
display is giving a reading other than the
journey time, the display switches to the
journey time, flashes for 5 seconds, and
returns to its original reading each time a
complete hour has elapsed.
! X-mode indicator (if
equipped)
NOTE
The journey time is reset when the
ignition switch is turned to the “LOCK”/
“OFF” position. It is also reset if the
ignition switch is turned to the “LOCK”/
“OFF” or “ACC” position prior to
restarting of the engine.
! Average vehicle speed
1)
Trip knob
Pressing the trip knob toggles the display
between the average vehicle speed corresponding to the A trip meter display and
the average vehicle speed corresponding
to the B trip meter display.
When either of the trip meter displays is
reset, the corresponding average vehicle
speed value is also reset.
NOTE
1)
2)
U.S.-spec. models
Except U.S.-spec. models
This display shows the average vehicle
speed since the trip meter was last reset.
When either trip meter display is reset,
the average vehicle speed corresponding to that trip meter display is not
shown until the vehicle has subsequently covered a distance of 1 mile
(or 1 km).
This indicator will be shown while the Xmode is activated. It will turn off when the
X-mode is deactivated.
! Turn off display of driving information display
The driving information display can be
turned off.
To turn off the display, turn the ignition
switch to the “LOCK”/“OFF” position and
press the “+” button adjacent to the clock
display for approximately 5 seconds.
Then, the driving information display and
the clock display will blink for 3 seconds to
notify you that the driving information
display has been turned off.
To restore the driving information display,
once again press the “+” button for
approximately 5 seconds.
NOTE
. The initial display setting of the
driving information display has been
set to operational at the time of shipment from the factory.
. The average fuel consumption and
average vehicle speed are calculated
even while the driving information display is not displayed.
. Even if you turn off the driving