3-30
Instruments and controls/Information display
speed and have your vehicle inspected at a SUBARU dealer as
soon as possible.
& Cruise control set indicator light (if
equipped)
This light illuminates when vehicle speed
has been set to use the cruise control
function. Refer to “To set cruise control”
F7-49.
& Automatic headlight
beam leveler warning
light (models with HID
headlights)
This light illuminates when the automatic
headlight beam leveler does not operate
normally.
If this light illuminates while driving or does
not turn off approximately 3 seconds after
turning the ignition switch to the “ON”
position, have your vehicle inspected at
your SUBARU dealer.
& Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
& Headlight indicator
light (if equipped)
This indicator light illuminates under the
following conditions.
. when the light switch i s turned to the
” or “ ” position
“
. when the light control switch is in the
“AUTO” position and the headlights illuminate automatically
Information display (if
equipped)
NOTE
If your vehicle is equipped with a color
multi function display, refer to “Multi
function display” F3-35.
& X-mode indicator light
(if equipped)
This light illuminates while the X-mode is
activated. It will turn off when the X-mode
is deactivated.
& Hill descent control
indicator light (if
equipped)
This indicator illuminates while the hill
descent control function is in standby. It
will flash while the hill descent control
function is operating. It will turn off when
the hill descent control function is not
available.
1)
2)
3)
Outside temperature indicator
Driving information display
Clock
With the ignition switch in the “ACC”
position, the clock appears on the display.
With the ignition switch in the “ON”
position, the outside temperature indicator, driving information display and clock
all appear on the display.