Instruments and controls/Warning and indicator lights
& SI-DRIVE indicator light (if
equipped)
& Select lever/gear position indicator (CVT models)
3-29
& Turn signal indicator
lights
These lights show the operation of the turn
signal or lane change signal.
If the indicator lights do not blink or blink
rapidly, the turn signal bulb may be burned
out. Replace the bulb as soon as possible.
Refer to “Replacing bulbs” F11-38.
& High beam indicator
light
1)
2)
3)
Sport (S) mode
Intelligent (I) mode
Sport Sharp (S#) mode
This light indicates the current SI-DRIVE
mode.
For details of SI-DRIVE mode, refer to “SIDRIVE” F7-29.
1)
2)
Upshift indicator
Downshift indicator
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated.
This indicator shows the position of the
select lever.
& Cruise control indica-
For models with manual mode, when the
manual mode is selected, the gear position indicator (which shows the current
gear selection) and the upshift/downshift
indicator light up. Refer to “Continuously
variable transmission” F7-23.
This light illuminates when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to “To set cruise control” F7-49.
For models with SI-DRIVE, the upshift/
downshift indicators are switched off while
the Sport Sharp (S#) mode is selected.
If the CHECK ENGINE warning light/
malfunction indicator light illuminates, the cruise control indicator
light flashes at the same time. At
this time, avoid driving at high
tor light (if equipped)
CAUTION
– CONTINUED –