11-36
Maintenance and service
odometer calibration, and clearance between the body and tires.
It also may be dangerous and
lead to loss of vehicle control.
. You must install four tires that are
of the same size, circumference,
construction, manufacturer,
brand (tread pattern), degree of
wear, speed symbol and load
index. Mixing tires of different
types, sizes or degrees of wear
can result in damage to the
vehicle’s power train. Use of
different types or sizes of tires
can also dangerously reduce
controllability and braking performance and can lead to an
accident.
. Use only radial tires. Do not use
radial tires together with belted
bias tires and/or bias-ply tires.
Doing so can dangerously reduce controllability, resulting in
an accident.
& Wheel replacement
When replacing wheels due to damage,
for example, make sure the replacement
wheels match the specifications of the
wheels that are fitted as standard equip-
ment. Replacement wheels are available
from SUBARU dealers.
WARNING
& Wheel covers (if equipped)
! Removing the wheel cover
Use only those wheels that are
specified for your vehicle. Wheels
not meeting specifications could
interfere with brake caliper operation and may cause the tires to rub
against the wheel well housing during turns. The resulting loss of
vehicle control could lead to an
accident.
NOTE
When any of the wheels are removed
and replaced for tire rotation or to
change a flat tire, always check the
tightness of the wheel nuts after driving approximately 600 miles (1,000 km).
If any nut is loose, tighten it to the
specified torque.
1)
2)
Notch
Valve hole
Insert a wheel cover remover into the
notch part on the opposite side of the
valve hole and pry the wheel cover to
remove it.