Starting and operating
& Vehicle Dynamics Control
OFF switch
again to reactivate the Vehicle Dynamics
Control system, the Vehicle Dynamics
Control OFF indicator light turns off.
With the Vehicle Dynamics Control system
deactivated, traction and stability enhancement offered by Vehicle Dynamics
Control system is unavailable. Therefore
you should not deactivate the Vehicle
Dynamics Control system except under
above-mentioned situations.
7-27
Tire pressure monitoring
system (TPMS) (U.S.-spec.
models)
NOTE
Pressing the switch to deactivate the
Vehicle Dynamics Control system can
facilitate the following operations:
. Standing start on a steeply sloping
road with a snowy, gravel-covered, or
otherwise slippery surface
. Extrication of the vehicle when its
wheels are stuck in mud or deep snow
When the switch is pressed during engine
operation, the Vehicle Dynamics Control
OFF indicator light on the combination
meter illuminates. The Vehicle Dynamics
Control system will be deactivated and the
vehicle will behave like a model not
equipped with the Vehicle Dynamics Control system. When the switch is pressed
. The Vehicle Dynamics Control system will be activated automatically
when the engine is started.
. If the switch is held down for 10
seconds or longer, the indicator light
turns off, the Vehicle Dynamics Control
system is activated, and the system
ignores any further pressing of the
switch. To make the switch usable
again, turn the ignition switch to the
“LOCK” position and restart the engine.
. Even when the Vehicle Dynamics
Control system is deactivated, part of
the brake control system is still active.
When the system is activated, the
Vehicle Dynamics Control operation
indicator light illuminates.
Type A
Type B
– CONTINUED –