7-18
Starting and operating
. When the select lever cannot be
shifted from “P” to “N”:
Refer to “Shift lock release using the shift
lock release button” F7-18.
. When the select lever cannot be
shifted from “N” to “R” or “P”:
Within 60 seconds after placing the ignition switch in the “Acc” position, move the
select lever to the “R” or “P” position with
the brake pedal depressed.
If you must perform the above procedure,
the shift lock system (or the vehicle control
system) may be malfunctioning. Contact a
SUBARU dealer for an inspection as soon
as possible.
If the select lever does not move after
performing the above procedure, refer to
“Shift lock release using the shift lock
release button” F7-18.
! Shift lock release using the shift
lock release button
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and stop the
engine.
2. Remove the shift lock cover using a
flat-head screwdriver. The shift lock release button is located under the shift lock
cover.
NOTE
To prevent damage to the shift lock
cover, wrap the tip o